After a certain amount of wear and tear of the stainless steel gear pump, a good inspection and repair shall be carried out, maintenance and repair shall be carried out according t...
2020/08/01
The principle of selection of KCB gear pump seals is that for occasions with low requirements, they can be selected based on experience and replaced when they are not suitabl...
2020/07/30
When the gear pump transmission device is disassembled and reassembled, first make the teeth of the movable claw coupling and the fixed claw coupling in the full-tooth engage...
2020/07/29
When the gear pumps transmission device is disassembled and reassembled, first make the teeth of the movable claw coupling and the fixed claw coupling in the full-tooth engag...
2020/07/29
Advantages of internal gear pump The internal gear pumps conveys liquid smoothly, without pulsation, low vibration and low noise. Internal gear pump has strong se...
2020/07/29
Gear pump flow: 12m3/h pressure: 0.33Mpa caliber: ф50, with motor Y112M-4. Gear pumps are mainly composed of gears, shafts, pump bodies, safety valves, and shaft end seals. The gea...
2020/07/28
shandong Yaguo Food Co., Ltd. purchases KCB83.3 stainless steel for use in various fields in the chemical industry, so how to avoid the failure of stainless steel gear pumps in ope...
2020/07/28
Gear pump, the pump body is made of 304 material, the main gear shaft is also made of 304 material, the pump flow rate is 0.6m3/h, the pressure is 0.6Mpa, the inlet and outle...
2020/07/28
Fluoroplastic magnetic pump is an acid and alkali resistant pump Fluoroplastic magnetic pump is a chemical process pump that applies modern magnetism principles and uses permanent ...
2020/07/24
1. Check the pressure, flow, and current at the outlet of the magnetic pump according to the operating indicators, and do not overload it. 2. Check whether the sound and vibration ...
2020/07/24